Your 2018 Grand Design Reflection 150 has a Lippert 1621 style pivoting pin box which is the Sidewinder/Revolution part # RP34FR.
If you wanted to replace that with the 5th Airborne part # RP78FR you mentioned this would be the correct fit. view full answer...
A bike rack that can withstand the extra torque on the end of a fifth-wheel trailer that can hold 2 60-pound fat tire electric bikes is the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount # HLY64FR. The RV Rider has an impressive per-bike weight capacity of 80 pounds and can hold fat-bike tires up to 5 inches wide. Apart from being able to withstand the extra forces exerted on the rack while mounted on a fifth-wheel trailer, the RV Rider has attaching... view full answer...
The angle of the Furrion side marker cameras in the kit part # FCE48TASL are not adjustable. It's set at an angle that allows you to see a small portion of the trailer and as wide of an angle to the side as possible to eliminate any blind spots. I attached a picture of what the view looks like you can see a small portion of the trailer still. Being able to see more of the trailer instead would only reduce the amount you could see out to the side.
The key is mounting the units at the correct... view full answer...
Yes, the Adco Olefin HD RV cover part # AD99ZR that you referenced does have access panels on both side of the camper all along the length of the camper to give access to any doors on the camper. This is also the correct size for your 2020 Grand Design Reflection 150 260RD and is the best option. It provides the best protection and also has the easiest install since the straps that run underneath it are weighted which means you can just throw them under the RV instead of having to crawl... view full answer...
We have the MaxxAir Standard RV and Trailer Roof Vent Cover, # MA00-933066 in white. This has overall dimensions of 19" long x 18-1/2" wide x 9-1/2" tall. view full answer...
Best option would be to connect the # A47PB to the wiring you have on your trailer currently so that you can easily plug in the GloLight LED Trailer Tail Light # STL178RFPB. For butt connectors you'd then want the part # DW05714.
This is a really solid choice for a light and would work well for your 2018 Grand Design Solitude. view full answer...
I have an option for you. Since you mentioned that you already flipped your axles, the Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX will work to accomplish the lift you are needing. The Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX will provide you with the parts needed to lift your tandem axles and provide you with another 2-1/4" of lift. view full answer...
The correct slide-out toppers for your 2021 Grand Design Reflection is the Solera RV Slide-Out Awning # LCV000177334 that will fit slide outs that are 140-145 inches wide and 48 inches long, and Solera RV Slide-Out Awning # LCV000168109 that fits slide outs that are 152-157 inches wide and 48 inches long.
Make sure you have at least 7" of clearance on either side of your slide out box, if you do not you need to order the next size down.
if you have an awning installed on the slide,... view full answer...
I do have an option for you but the Yakima RidgeBack 4 Bike Rack part # Y02458 isn't rated for use on a fifth wheel trailer. That said, Yakima does offer a very similar rack rated for this use, the Yakima LongHaul RV Bike Rack part # Y02476 which was designed specifically for trailers. It also comes with both bike and hitch locks. view full answer...
Adding one MORryde X-Factor Crossmember # MR33WR to your 2019 Grand Design Reflection 230RL will definitely help. However, for full support and stability on a tandem axle 5th wheel like yours you want to install 3. These attach to the leaf spring hangers, running directly across between them. As long as your drain is not between the hangers it won't be a problem. view full answer...
The etrailer leaf spring part # e27SR is the correct capacity and length to work on your 2020 Grand Design Reflection 240RL. It having a couple more leaf's would not be an issue at all either. Since the height would be slightly different you would want to replace all of your springs on your trailer.
For a u-bolt kit we have the CE Smith kit part # CE23003 which is for 3 inch diameter axles like you have. view full answer...
The amount of leaves won't make a huge difference on whether they will flatten out or not as what really matters is the capacity of the spring relative to the axle and trailer weight. I would go with at least ta 4,400 lb leaf spring or maybe slightly higher.
You will also need to measure the current springs you have to determine the correct replacement as well. I attached a link to this page that has all of the options we have. First select the length that best matches and then the capacity... view full answer...
We do have the replacement rubber trivet support bumpers for the Furrion stove # FGH4ZSASS that you referenced as part # CFGH4ZSASSTRIVETSPRT. view full answer...
For your Dexter 072-078-00 axle, I recommend going with the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles # e44SR.
These leaf springs are the same length as your current springs but are going to have a higher capacity at 5,000 lbs. view full answer...
The Correct Track Tandem Lift Kit part # RR23QX that you referenced is exactly what you are looking for. This fits all RVs with tandem axle setups like your 2021 Grand Design Reflection 150 Series 268BH regardless of if the axles are above or below the leaf springs. This also will give a lift of 2-1/4 inch. view full answer...
The Advent Air AC unit part # ACM135B would be a great choice for your Reflection 280RS that is designed for ducted applications, is cost effective, and also comes with wiring that would plug into the pre-wiring of your RV. view full answer...
There really are no drawbacks to adding a shock kit to your 2018 Grand Design Reflection 150 Series 220RK. I do like them as they will smooth out the ride and actually help with sway issues as well. There are a few options to choose from and though they are more expensive, I do prefer the Roadmaster options. These have a Lifetime Warranty and come as tandem axle kits as well. I was unable to find the capacity of the axles on your camper, so I do have all three options listed below.
Roadmaster... view full answer...
You would have to turn the roller like the # LCV000163285 by hand 14 times before attaching the end of the fabric to the awning rail. If it was already installed you'd have to remove the awning from the rail and wind it before reconnecting it. view full answer...